Spec comparison: Suzuki GSXR-1000 vs rivals

Superbikes have so much power packed in them that they can be classified as road monsters. However, to enjoy them fully, you need a controlled environment. They are also available in proper race-spec variants which helps you unleash their full potential on the track.

Suzuki recently introduced the updated GSX-R1000, while the Honda CBR1000RR Fireblade was also launched some time back. All the motorcycles have hardcore electronics on offer that help you get the best adrenaline rush. We compare these motorcycles and figure out which one you should pick.

Engine and performance –

The Suzuki GSX-R1000 is powered by a 999cc inline four-cylinder engine which develops 202PS of maximum power and a peak torque of 117.5Nm. The Kawasaki Ninja ZX-10R gets a 998cc motor which churns out 200PS @ 13,000rpm and a peak torque of 113.5Nm @ 11,500rpm. It also gets ram air, which is forced in the combustion chamber and helps in raising the maximum power output to 210PS @ 13,000rpm.          

The Yamaha R1 is powered by a 998cc parallel four-cylinder engine which develops 200PS @ 13,500rpm and a peak torque of 112.4Nm @ 11,500rpm. The Yamaha R1 gets a crossplane crankshaft with an uneven 270-180-90-180 degree firing sequence for high levels of linear torque. The Honda CBR1000RR Fireblade is powered by a 999cc engine which develops 191PS @ 13,000rpm and a peak torque of 114Nm @ 11,000rpm. All the motorcycles are mated to a 6-speed transmission. The Kawasaki with ram air is the most powerful  and the Honda is the least powerful motorcycle in this comparo.

Features -

The Suzuki GSX-R1000 gets a Suzuki Dual Throttle Valve (SDTV) system which has two butterfly valves in each throttle body barrel. The primary valve is controlled by the rider while the secondary valve is controlled by the ECM. The ECM enhances combustion efficiency, makes throttle response linear and improves low-end and mid-range torque. The bike gets Suzuki Drive Mode Selector (S-DMS) which allows the rider to select the rider from three fuel-injection and ignition-system maps and an electronically controlled steering damper which uses the ECM to monitor motorcycle speed and adjusts itself for lighter steering at slower speeds while delivering more damping force at highway speeds. 

The Kawasaki Ninja ZX-10R gets a new crankshaft with lower moment of inertia which helps in faster acceleration and deceleration and an all-new cast construction seven-piece frame with reduced wall thickness which offers lighter handling. The bike gets Bosch Inertia Measurement Unit (IMU) which measure 6 degrees of axes with the ECU, Sports Traction Control (S-KRTC) system with 5 modes, Kawasaki Intelligent Anti-Lock Brake System (KIBS), Kawasaki Launch Control Mode (KLCM), Kawasaki Engine Braking Control (KEBC), Kawasaki Quick Shifter (KQS) and Electronic Steering Damper (ESD). 

The Honda CBR1000RR Fireblade features a 5-axis Inertial Measurement Unit (IMU) that manages the ABS system, 9-level Honda Selectable Torque Control traction control (HSTC), Honda Electronic Steering Damper (HESD), Throttle By Wire (TBW), Rear Lift Control (RLC) and Wheelie Control. The bike offers three riding modes (Street, Circuit and Mechanic), five levels of power delivery and three levels of engine braking control. As you might’ve figured out, Honda made sure that even if they were late to join the electronic wizardry party, they made a banging entry. Moreover, the all-LED treatment to the headlight makes it looks cool. 

The Yamaha R1 gets electronically activated Yamaha Chip Controlled Intake (YCC-I) for better performance, a compact and lightweight 4-2-1 exhaust system, a long upward-truss type swingarm, Ohlins-sourced ERS semi-active suspension, carbon fibre fairings to reduce the weight further, a GPS-powered data acquisition system and magnesium rear frame. The bike gets a higher windscreen for better aerodynamics and low- mounted headlamps. 

As the spec sheets goes, the Kawasaki is the most feature- loaded motorcycle while the other three are not lagging much behind in the race.

Dimensions and Cycle Parts – 

The Suzuki GSX-R1000 gets a twin-spar frame which is welded on five cast aluminium-alloy sections. It also gets an all aluminium swingarm which is also welded using just three castings. The bike gets 43mm inverted Showa Big Piston forks at the front and link-type monoshock unit with adjustable rebound damping with spring preload at the rear. Braking duties are handled by twin 310mm disc rotors with radially mounted Brembo monobloc calipers at the front and 220mm rear disc rotor with Brembo calipers at the rear. ABS is offered as standard.  The motorcycle is shod with Bridgestone 120/70 Z R17 tubeless tyre at the front and 190/50 Z R17 tubeless tyre at the rear. Seat height is 810mm, ground clearance is 130mm, kerb weight is 203 kg and the fuel tank capacity is 17.5litres. 

The Kawasaki Ninja ZX-10R gets a lightweight twin-spar cast aluminium chassis. The bike gets 43mm inverted Showa forks with external compression and rebound damping chamber at the front and a horizontal back-link monoshock with BFRC-L lite gas-charged shock and compression and rebound damping at the rear. Braking duties are handled by twin 330mm disc rotors with dual radially mounted monobloc 4-piston calipers at the front and a single 220mm semi-floating petal type disc rotor with single bore aluminium piston caliper at the rear. ABS is offered as standard. The bike gets Bridgestone 120/70 Z R17 tubeless tyre at the front and 190/55 Z R17 tubeless tyre at the rear. Seat height is quite high at 835mm, ground clearance is good for a superbike at 145mm, kerb weight is 204 kg and it gets a fuel tank capacity of 17 litres.

The Honda CBR1000RR Fireblade gets a diamond-type , aluminium composite twin-spar frame. The bike gets 43mm Ohlins inverted Big Piston forks with 120mm travel at the front and a monoshock unit with HMAS damper with 10-step preload stepless compression and rebound damping with 138.2mm travel at the rear. Braking duties are done by twin 320mm discs rotors with Brembo monobloc calipers at the front and a single 220mm disc rotor with Brembo calipers at the rear. ABS is offered as standard. The bike is shod with Bridgestone 120/70 Z R17 tubeless tyres at the front and 190/50 Z R17 tubeless tyres at the rear. Seat height is high at 832mm, ground clearance is 130mm, kerb weight is 196kg and gets a fuel tank capacity of 16 litres. 

The Yamaha R1 gets an aluminium deltabox frame. The bike gets 43mm telescopic forks with 120mm travel at the front and a monoshock swingarm link suspension with 120mm travel at the rear. Braking duties are handled by dual 320mm disc rotors at the front and 220mm disc rotors at the rear. ABS is offered as standard. The bike gets Bridgestone 120/70 Z R17 tubeless tyre at the front and 190/55 Z R17 tubeless tyre at the rear. Seat height at 855mm is very high for average riders, ground clearance is 130mm, kerb weight is 199kg and it gets a 17-litre fuel tank. 

Pricing –

The Suzuki GSX-R1000 is priced at Rs 19 lakh. The Honda CBR1000RR is priced at Rs 17.61 lakh. The Kawasaki Ninja ZX-10R at Rs 16.4 lakh is the cheapest motorcycle of the lot. The Yamaha R1 is the most expensive motorcycle of the lot, priced at Rs 24.74 lakh (all ex-showroom, Delhi)- it is almost Rs 6 lakh more expensive than its nearest rival. Nearly all the motorcycles offer more or less the same electronics; all of them are Japanese so there are no issues with the reliability factor, and all of them have been updated in the recent past. The ZX-10R was launched in 2016 in the country and it is more or less a new motorcycle even now. With the pricing and features that it offer, it’s simply an irresistible deal to shell out your cash for. The green goblin, in my view, is the most bang for your buck in this segment.

Source: ZigWheels.com